xFr1ct10nx
03-01-2009, 02:23 PM
No this is not Interlocking or Geomerging(or Geoglitching as some call it), its just merging. Its close to being the same thing but at smaller increments. Most of the time you wont need to save and quit.
Unique Qualities: One way to geomerge at smaller increments and even interlock.
Geomerging Method: When geo merging and you want it to go maybe only 2in(est.) down, you're going to use the same types of thing you use for regular Geomerging. You can brace your object using any immovable object, though teleporters are reccomended. Once you have braced it, place either a Bridge or a Fence Wall (However many you need to that will get the job done, must be less then the side of the door you are using; either sides or upside down), and place them on the opposite side of the object you are trying to Geomerge/Merge. then place a door using whichever side you wish, use the side you need to get to the right depth.
then tap the A Button and you are set for that.
1) Place a box
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039375-Medium.jpg
2) Place needed amount of Fence Walls, Walls, or Bridges
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039538-Medium.jpg
3) This pic shows difference in how far down it will go
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039591-Medium.jpg
4) Get the door in right position and surround object with teleporters
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039655-Medium.jpg
5) Geomerge needed amount of times and here you go!
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039770-Medium.jpg
Does'nt that look sexy!
Interlocking Method: This is a bit more confusing and really only has about 2 uses: Making interlocked bridges into boxes more smooth/clean, and making smooth/clean free-floating floors/roofs.
I'm going to use this senario: Try to interlock/Merge a bridge in between two boxes to make, guess what? A Bridge! lol
First you need those boxes on the sides. Once thats done, get your Bridge and set it on top of the edges of the two boxes. It is suggested that you put something under the bridge(NOT TOUCHING IT!) like a Teleporter or a Box/Wall just to the depth you want it. Then place how ever meny other Bridges or Fence Walls on top of your first original Bridge(using the same rules as the geomerging technique above). Once that is completed, depening on how you want it to look you may wish to place some braces around it(i always like to). Then place the door(using same rule as Geomerging technique above), on top of all the Bridges and/or Fence Walls you previously placed on the original Bridge.
1) Place boxes and Bridge appropriatly
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039317-Medium.jpg
2) I moved mine above ground for seasy instruction, but if you want it closer to the ground you may need to geomerge a box into the ground abit for reasurance. Or stack walls sideways, what ever floats your boat.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040099-Medium.jpg
3) Make sure the box is just under where you want your Bridge to be. Notice the crack.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040006-Medium.jpg
4) Place doors to where needed(most likely you'll need two, one on each side), then make sure you can see the side(or top, depending on which side you use) through the (x) amount of Bridges, Fence Walls, or Walls placed.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040132-Medium.jpg
5) Geomerge and feel sexy! Notice: The bridge is still visible, mine had a barely noticable bumb, most likely it will not affect gameplay, however if you wish to fix it you can always try again, also if you do not want it visible you can try pusing it down further, though you may also need to adjust other items or objects.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040475-Medium.jpg
*Bridges and Fence Walls widths are barely noticable, however, they do have slightly different widths. This can affect how the techniques work. On another note, you may also use walls, but remember that they are thicker and will also affect the outcome of your Merging.
I hope this little tutorial help you, and I hope that this was not already posted, I searched "Merging" exactly what I was looking for did not come up. Thanks again, -Friction
Unique Qualities: One way to geomerge at smaller increments and even interlock.
Geomerging Method: When geo merging and you want it to go maybe only 2in(est.) down, you're going to use the same types of thing you use for regular Geomerging. You can brace your object using any immovable object, though teleporters are reccomended. Once you have braced it, place either a Bridge or a Fence Wall (However many you need to that will get the job done, must be less then the side of the door you are using; either sides or upside down), and place them on the opposite side of the object you are trying to Geomerge/Merge. then place a door using whichever side you wish, use the side you need to get to the right depth.
then tap the A Button and you are set for that.
1) Place a box
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039375-Medium.jpg
2) Place needed amount of Fence Walls, Walls, or Bridges
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039538-Medium.jpg
3) This pic shows difference in how far down it will go
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039591-Medium.jpg
4) Get the door in right position and surround object with teleporters
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039655-Medium.jpg
5) Geomerge needed amount of times and here you go!
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039770-Medium.jpg
Does'nt that look sexy!
Interlocking Method: This is a bit more confusing and really only has about 2 uses: Making interlocked bridges into boxes more smooth/clean, and making smooth/clean free-floating floors/roofs.
I'm going to use this senario: Try to interlock/Merge a bridge in between two boxes to make, guess what? A Bridge! lol
First you need those boxes on the sides. Once thats done, get your Bridge and set it on top of the edges of the two boxes. It is suggested that you put something under the bridge(NOT TOUCHING IT!) like a Teleporter or a Box/Wall just to the depth you want it. Then place how ever meny other Bridges or Fence Walls on top of your first original Bridge(using the same rules as the geomerging technique above). Once that is completed, depening on how you want it to look you may wish to place some braces around it(i always like to). Then place the door(using same rule as Geomerging technique above), on top of all the Bridges and/or Fence Walls you previously placed on the original Bridge.
1) Place boxes and Bridge appropriatly
http://i512.photobucket.com/albums/t326/xfr1ctionx/68039317-Medium.jpg
2) I moved mine above ground for seasy instruction, but if you want it closer to the ground you may need to geomerge a box into the ground abit for reasurance. Or stack walls sideways, what ever floats your boat.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040099-Medium.jpg
3) Make sure the box is just under where you want your Bridge to be. Notice the crack.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040006-Medium.jpg
4) Place doors to where needed(most likely you'll need two, one on each side), then make sure you can see the side(or top, depending on which side you use) through the (x) amount of Bridges, Fence Walls, or Walls placed.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040132-Medium.jpg
5) Geomerge and feel sexy! Notice: The bridge is still visible, mine had a barely noticable bumb, most likely it will not affect gameplay, however if you wish to fix it you can always try again, also if you do not want it visible you can try pusing it down further, though you may also need to adjust other items or objects.
http://i512.photobucket.com/albums/t326/xfr1ctionx/68040475-Medium.jpg
*Bridges and Fence Walls widths are barely noticable, however, they do have slightly different widths. This can affect how the techniques work. On another note, you may also use walls, but remember that they are thicker and will also affect the outcome of your Merging.
I hope this little tutorial help you, and I hope that this was not already posted, I searched "Merging" exactly what I was looking for did not come up. Thanks again, -Friction